Compare and Contrast Essay on Pet Dog or Cat Essay

All over the world, people adopt or purchase animals to serve as pets. People own pets for a variety of reasons, and there are many different animals that can serve as pets. However, two of the most commonly found pets are dogs and cats. Both animals can serve as excellent pets, but depending on the customer, a dog might make a better pet than a cat, or a cat might make a better pet than a dog. In order for a future pet owner to make a choice between investing in a dog or cat, it all comes down to the cost, time, and attention revolving around the two different animals. When investing in a dog or a cat, the customer has to understand that both animals cost money to own. In general, dogs are a more expensive investment. Even in the initial adoption or purchase, a dog usually costs more than a cat. A dog owner has to buy food for their dog to eat twice a day; and the quantity of each meal varies between big dogs and small dogs. In addition, dog vaccinations cost money, as well as different supplies like shampoo to keep dogs clean, and toys to keep dogs happy. If a pet dog gets sick, the owner has to pay money to take the dog to a vet and buy medicine for the animal to get better. If a dog owner goes out of town, he or she usually has to pay money for someone to take care of their dog. Which can end up being expensive because of the amount of time behind taking care of a dog. Just like dog owners, cat owners have to spend money on food for the animal. Cats do not normally eat as much as dogs but still need to be fed two times a day. Cat owners have to buy shots for their cats to keep them healthy as well as purchase different supplies a cat needs to function. Cat owners have to buy a litter box and litter for their cats to use the bathroom. Pet cats and pet dogs both cost money to support, and the cost of investment is different depending on the animal. Along with cost, owning a pet dog or cat requires time out of the owner’s schedule. Both animals need their owner to feed them two times a day and need their owner to make sure they have water. A dog requires a lot of time  from their owner in order to be happy. Dogs need to be let outside or taken on walks a few times everyday in order to use the bathroom. In addition, dog owners must have time to play with their dogs and give their dogs attention. A dog cannot be locked alone inside a house all day, everyday. Dogs also cannot bathe themselves, so whenever they get dirty, dog owners must have time to wash them or they will be living in their own filth. Cats need time from their owners as well; but cats are more independent so do not take as much time out of their owners’ schedule. Cats are fine on their own for long periods of time as long as they have food and water. Cats do not have to be let outside in order to use the bathroom, but cat owners must occasionally find time to clean out a cat’s litter box. In addition, cats are able to groom themselves so they do not have to be bathed on a regular basis. Cat owners do have to find time to trim their cat’s claws whenever they get too long. Both cats and dogs require time out of their owners schedule in order to be happy as a pet. Pet dogs and cats require a certain level of attention from their owners. Dogs enjoy being part of their owners’ lives. Dogs enjoy going on walks and runs with their owners. They also enjoy playing with their owners, which can be done with a simple game of fetch. Dogs do not like being home alone and are excited when their owners come home after being out. A dog owner needs show that he or she loves his or her dog by petting it and giving it enough attention. Dogs are usually very social animals and will show the same amount of love towards its owner as its owner shows towards it. Cats are more independent animals and do not require as much attention as dogs do. However, cats do enjoy being played with and loved on but not to a high extent. Cats enjoy alone time and can still be happy if its owner has a busy schedule. Both animals need attention from their owners, but differ in the amount of attention needed. When investing, the customer must decide if he or she wants to care for a dog or a cat. Each animal requires a different level cost, time, and attention which can be deciding factors on whether to get a dog or cat. Both animals are â€Å"good† pets, but one might be the better pet, depending on the owner.

Descartes Meditation 1 Summary Essay

In his first meditation, Descartes embarks on a journey to ensure that all his beliefs are true. He deems that he must rid himself of all false knowledge in order to obtain any true knowledge. Descartes decides to doubt everything he has previously held to be true. He will rely on his reasoning ability to rebuild his own knowledge, beginning with things of which he is completely certain. He states, â€Å"But reason now persuades me that I should withhold my assent no less carefully from opinions that are not completely certain and indubitable than I would from those that are patently false,† (18). Descartes refuses to accept anything that is possible to doubt. His reason for doing so is because he truly believes that this is the only way to discover the possible existence of something that cannot be doubted. While the text is at times muddled, Descartes does use a method in his attempt to acquire knowledge. He starts by defining everything he could possibly doubt. He presents the argument of sensory deception. In his life, the things he has accepted as true are things he has learned through his senses. In this meditation, he rejects knowledge that which he has learned through his senses because he claims that the senses can often deceive. But, while the senses are deceitful in some cases, Descartes claims that there are certain things learned through the senses that would be crazy to doubt. For example, he simply describes what he is wearing and what he is doing at the time he is writing the meditation. He uses his senses in order to write this description, and he claims that he would have to be insane to doubt what he is saying (19). Descartes then goes on to present a second argument, about dreams. He claims that there is the possibility that he is dreaming. He compares the perceptions we have in our dreams to those we have when we are awake. They are essentially the same. He concludes that there is no definitive way to distinguish being awake from being asleep. However, he still maintains that there are certain things that would be foolish to doubt. He considers several of his a priori beliefs as potentially containing doubt. For example, he casts some of his basic knowledge of mathematics into doubt. He states, â€Å"For whether I am awake or asleep, 2 plus 3 make 5, and a square  does not have more than 4 sides,† (20). He ultimately concludes that while the senses are at times deceitful, certain things are indubitable. Descartes then transitions to the existence of God. His considers the potential doubt of his a posteriori belief of God. He claims that God is all-powerful and all knowing. He reasons that he, himself, could not have come up with the idea of God, because God is a being more perfect than himself. And the only way he could have an idea of such a supremely perfect being is if God himself planted the idea in the meditator. Therefore, he concludes that God does exist. Since God is supremely good, the meditator determines that God is not a deceiver. The meditator then reaches the conclusion that God is not a deceiver, but there could be a â€Å"supremely powerful and clever,† (22) evil genius who is deceiving him. This leads the meditator to believe that everything his senses tell him is possibly an illusion created by this evil genius. Descartes ends his first meditation in a state of ambiguity. The possibility of an evil genius deceiving him causes him to doubt everything. He closes the meditation without having reached a distinct conclusion, but he states that he will refuse to believe the false things he used to believe.

Operational Management in Health & Social Care Essay

Operational Management in Health & Social Care - Essay Example As the report declares TPS way of thinking is largely influenced by the thinking of Edwards Deming, the quality guru who taught, among other thoughts, that managers should stop their reliance on mass inspection as a way of achieving quality and instead embed quality in the production process and the product in the first instance. Essentially, â€Å"lean† means doing more with less by eliminating or at least limiting the waste of time and resources. Lean thinking is a management strategy that applies to all organizations, including health care organizations, because the concept has to do with the improvement of processes. Every organization has in place a series of processes intended to create value for its customers. The central idea in lean thinking is to scrutinize an organization’s processes with the aim of discerning between the processes that add value to the customer and those that do not and are, therefore, wasteful.  This paper stresses that lean thinking is o ften associated with manufacturing business organizations, not health care where the wastage of time, supplies and money are rampant. However, the principles of lean thinking can work in health care just as they do in manufacturing; this paper demonstrates how by analysing two healthcare organizations that successfully applied lean management to reduce cost and wastage and improve service delivery. The analysis is preceded by an overview of the key concepts of lean management.

Safety and Security in Health Care Assignment Example | Topics and Well Written Essays - 1000 words

Safety and Security in Health Care - Assignment Example The employee health department plays the role of protecting the employees from succumbing to diseases that may be transmitted by medical practitioners. Protection is done through immunizations. The department ensures that all the health of employees is safeguarded through reduction of malingering by workers as well as numerous reimbursement claims. Â  Facility safety committees are primarily set up to shield employees from injuries that may result from accidents. The committee has the role of ensuring that the right steps towards disaster management are properly followed for purposes of saving a life. Kavaler and Spiegel (2003) argue that safety committees have the responsibility of conducting mass education on disaster. Â  I operate with The Federal Physician Data Center that highlights on the vices that take place in health facilities. I own the state license that allows me right of entry for other licenses in my state. From my regulatory agency, I am able to understand the actions to be taken against nurses upon misconduct. Â  According to Kavaler and Spiegel (2003), national tracking agencies agree on the extent to which a healthcare practitioner can intermingle with the patients. These agencies also define the actions to be undertaken just in case the rules and regulations of the agency are not adhered to. National tracking agencies ensure that all structures required to execute the standards of the agency are held fast. Â  Physician peer review has the ability to withdraw any form of punishment that may be imposed on a physician in relation to his or her conduct. Peer review has the mandate of denying any form of invalidation of a physician’s license to operate. They also protect the physicians from possible lawsuits as a result of their conduct. Â  

Concept Engineering, Advanced Research, Air Traffic Flow Management, C Essay

Concept Engineering, Advanced Research, Air Traffic Flow Management, Collaborative Decision Making - Essay Example A single delayed flight causes the company additional couriers, increased employee overtime & time of business operation that would mean an added compensation and cost of operation such as fuel, electricity etc. Also, the disrupted logistic process caused by a delayed flight would cost the company to pay high package delay fees (Metron Aviation - FedEx., n.d.). FedEx partnering with NASA that provides it with direct access and control of data from a collection of legacy systems was able to increase its efficiency and effectiveness in doing the business as it reduced delays by the integrated aircraft track and flight data from the airport feed and surveillance. With this, they would be prompted 30 minutes in advance an arrival or a possible delay which allowed them to make significant decisions to still make a delivery on time (Metron Aviation - FedEx., n.d.). IT services that would not be merely dependent on aviation and IT systems with real-time analytic applications, instead of being dependent on disk storage systems would be best for FedEx to have. Some of which that would make it possible would be the EMC Greenplum Platform and database appliances from Teradata. Aside from which, sensors such as the new SensaWare service that involves the application of active sensors inside packages that contain high-value merchandise would be able to skip the scanning process that would take time, instead would send out telemetry data that would cover the speed of the package’s travel, would help in tracking the item, and possible rerouting if needed (Vizard, M., n.d.).

Healthcare Systems Around the Globe Research Paper

Healthcare Systems Around the Globe - Research Paper Example The French have were found to have the most efficient healthcare system in a report released by the World Health Organization in the year 2000. The report was notorious within the United States as the country was found to have the highest expenditure, however, was ranked 15th in its overall efficiency (Folland, 2006). This paper will make a comparison between the French and American healthcare systems. Health Statistics and Costs: Comparison between U.S. and France Firstly, the analytical data obtained from the two countries illustrates the difference in their efficiency. According to the report released by WHO in 2011, France has a population of approximately 65 million and a life expectancy of 81,8 years (World Health Organization, par 1). Females in France have a slightly higher life expectancy of 85 years whilst the males have an expectancy of 78,5 years. This places the country 10th in the world. The United States has a slightly lower life expectancy with females at 80,67years a nd males at 74,89 years (World Health Organization, par 1). The United States is ranked number 33 in the world life expectancy rankings. The United States has a mortality rate of 8,25 per 1000 population whilst France has a rate of 4,10 (World Health Organization, par 1).The leading causes of death in France include lung cancer, coronary heart disease, breast cancer, stroke and Alzheimer’s. ... Health Care Financing: Comparison between U.S. and France Healthcare in the United States is financed through both private and public sectors, whilst the funding in the French healthcare system is largely controlled by the government (Shi and Douglas, 2009). The French government funds approximately 70% of an individual’s healthcare costs and in cases of long term care all the patient’s costs are covered. Citizens may also obtain supplemental coverage from private insurers who are frequently nonprofit organizations. The French government spends approximately 11,2% of the country’s GDP on healthcare. The United States spends 15% of its GDP on healthcare and when considering cost per capita, this equates to almost double the amount spent by France (Shi and Douglas, 2009). In addition, citizens in the United States spend more money on pharmaceuticals and hospital care than the French. Healthcare Administration: Comparison between U.S. and France Healthcare in Americ a is overseen by the United States Department of Health and Human Services. The provision of health insurance by the American government is carried out through Medicaid and Medicare which were established in 1966. As mentioned above, the French healthcare system is largely controlled by the government through the French National Health Service. This service refunds patients their healthcare costs and the citizens are expected to contribute depending on their income. Health Care Personnel and Facilities: Comparison between U.S. and France The United States has one of the lowest physician per capita ratio with approximately 731Â  000 physicians, equating to approximately 2,5 physicians per 1000. There are approximately 26,669,603 nurses which equates to

Strategy and Competition Case Study Example | Topics and Well Written Essays - 1500 words

Strategy and Competition - Case Study Example In 2008, the company recorded revenue of $ 705 million which is far better when compared to 2004’s $9.7 million (Ivey, 2010, p.8). This was attributed to the support that several authorities within the world have given which promoted the execution of the PV technology. Canadian Solar Company has been experiencing losses over the past few years though its revenues have grown by more than 135 percent over the years (Ivey, 2010, p.8). These loses have been attributed to the high competition around the world which have contributed to a decrease in the company’s market share (Ivey, 2010, p.9). The management under the leadership of Dr. Qu is faced with the mandate of turning the losses into profits amid the high international competition and economic crisis by formulating and executing a viable profit plan. No business can operate in a vacuum. Each and every business requires an environment to operate in. After a thorough analysis, the external environment of Canadian solar company consist of the political environment, the technological environment, the social environment, the economical environment, competitors in the industry and the industry itself. According to Porter’s five forces model, Industry encompasses the competitors, the suppliers, the consumers or the customers, technology available and the restrictions available for entry and exit in the industry by firms. The market consists of potential customers who include the domestic users and commercial users. Canadian Solar incorporation produces a wide variety of products such as the industrial and automotive and consumer products (Ivey, 2010, p.6) to suffice the customer’s needs. The various authorities in the different countries have greatly promoted and encouraged production of and the technology of the PV cells. Most of the countries across the universe in 2008 and 2009 provided incentives for the development of the technology e.g. China and Canada (Ivey, 2010, p.7). Government

Solar Energy Essay Example | Topics and Well Written Essays - 500 words

Solar Energy - Essay Example SPV technology have enabled creation of large amounts of energy from solar radiation in addition to the reduction of the costs of purchasing solar PV panels. This technology has various advantages and disadvantages in its use with implications in its future developments as explained in the following sections. The most significant advantage of the solar PV technology is that it produces environmentally friendly form of energy (Solanski, 2009). Solar cells produce silent and clean energy which illustrates the advantage of PV solar systems which do not produce harmful pollutants since they are only fueled by natural sunshine or solar radiation. In this regard, solar systems do not lead to depletion of natural resources and thus prevents endangering of human, animal and plant health (Goetzberger and Hoffmann, 2005). In terms of space, the solar PV systems have an advantage of being installed on rooftops especially in small scale energy production. Furthermore, solar PV systems have a benefit of long life span with limited need for maintenance (Solanski, 2009). Solar energy is also cheap because it is a renewable energy which illustrates that there is no need importation of fuel as it is locally available and free. More importantly, the solar PV technology allows for building of PV systems of any size depending on the energy requirements, whether large scale or small scale and thus these systems are scalable (Energy weekly News, 2012). Whereas the solar PV systems have been described as environmental friendly, it is important to note that there are some toxic elements or chemicals such as arsenic and cadmium which are used during the process of PV energy production. Nonetheless the environmental impact of these chemicals is relatively minor in addition to the fact that they would be controlled or managed through proper disposal and recycling (Solanski, 2009). Additionally, the solar PV technology presents with a disadvantage or significantly high cost of producing

Discussion week 2 Essay Example | Topics and Well Written Essays - 500 words

Discussion week 2 - Essay Example system results to wrongful conviction because a public defendant has very many cases to handle and lacks ample time to spend on each case, and this affects the quality of representation (Collica & Furst, 2012). In the long rand, there is wrongfully conviction because the Public defender does not comprehensively analyze the case. There is also poor contact between the public defender, and there is unfair conviction. In contrasting the level of representation illustrated by Bright to the level of representation to white collar, corporate, and environmental crimes is to say that money has power and influence. A plaintiff without money to hire a competitive Public defender receives poor representation in the court of law, and the case does not favor him/her (Collica & Furst, 2012). In solving these issues, every state should adequately fund the public defender system because everyone should get fair and justified trial. It becomes difficult to receive a fair trial if the representation is poor. Adequate resourcing and funding the public defender program results to a fair trial and effective representation. The war on drugs has resulted to increased imprisonment. There has been heavy taxation in order to imprison and rehabilitate the drug victims. According to Collins (2012), since the commencement of war on Drugs, there has been a great increase of those convicted. There has been unequal percentage of the minority groups convicted and imprisoned without proper investigation. In the year 2003, there was a high rate of imprisonment of African Americans accuses of drug abuse in US (Collica, 2012). However, the use and trafficking of illegal drugs among the white and the African Americans is equal, yet the African Americans are the ones accused and imprisoned. This is unfair and against the constitutional rights on discrimination based on race and color (Collica, 2012). The increase of immigrants in US has reduced the crime rates. Indeed, immigration has a

Communication and organizational Performance Essay

Communication and organizational Performance - Essay Example As a result, they have been forced to adopt strategies and behaviors that can help them improve their performance and profitability and therefore remain relevant. Over the years, communication has proved to be one of the most central factors to individual and organizational performance (Abugre, 2007, p. 42). Effective communication has the potential of significantly improving individual and organizational performance. On the other hand poor communicant can considerably compromise individual and organizational performance. Communication is indeed any organization’s lifeblood. Communication directly influences employee trust, productivity, and morale (Ng et al, 2006, p. 474). Studies have shown that effective communications can maximize efficiency, company operations, increase organization’s overall success, and accelerate the corporate strategy execution. Most managers have realized the essence of communication in organizational performance and are extensively using corp orate communication to achieve organizational goals and objectives (May and Mumby, 2005, p. 29). This paper will critically evaluate the extent to which managers use corporate communication to manipulate understanding and encourage compliance with management direction. Corporate communication enables corporate organization to relay information to its employees, shareholders, stakeholders, agencies, media, and the general public. It is important that an organization communicate the same message to its publics and especially its employees in ethical, credible, and coherent manner. According to Robson, Skarmeas and Spyropoulou (2006, p. 585), corporate communication enables employees of an organization to coordinate tasks, learn from each other and help them to create and maintain viable relationships. Several studies have shown that corporate communication is linked to improved performance in the sense that it enhances employees’ commitment in the workplace, provides opportunit y for learning, and is critical in enhancing employee satisfaction (Buchanan and Huczynski, 2010, p. 70). While corporate communication in itself is central to individual and organizational performance, it is not enough for an organization to have corporate communication as part of its strategies. Corporate communication of any organization should be designed in such a way that it achieves its objectives and significantly contributes to the achievement of overall organizational goals and objectives. It should be packaged in such a way that it has huge and positive managerial impacts; in other words it should be a channel to flow of information, policies, and even resources (Cornelissen, 2011, p. 18). Corporate communication is a managerial tool that is often expected to coordinate activities, share information, policies, and resources with employees, reduce unnecessary managerial rules and burdens, and eventually improve organizational performance (Robson, Skarmeas and Spyropoulou, 2006, p. 589). In the absence of corporate communication, organized activities of organizations would cease to exist and organization would have many uncoordinated activities which in return would lead to poor organizational performance (Abugre, 2007, p. 45). It is in the light of this fact that managers use corporate communi

Henry James referred to TTOTS as a potboiler Essay Example for Free

Henry James referred to TTOTS as a potboiler Essay Henry James referred to ‘TTOTS’ as a potboiler. In light of this comment, explore the establishment of a simple ghost story in the prologue and first five chapters. Henry James stated that ‘TTOTS’ was a potboiler, meant only to be perceived as a simple ghost story which in the Victorian era was how it was originally accepted. However a more modern audience ay interpret the novella as something more. Relating back to the idea of a simple ghost story, the novella starts with a typical ghost story setting – ‘The story had held us, round the fire’ emphasised by the description of the house being ‘gruesome’ and it being ‘Christmas Eve’ informing us that it is night time. All are contributing factors to an ideal ghost story and all of these points start to build the tension and suspense up already within the first few lines. ‘Held us, round the fire’ tells us how they are clinging to this materialistic substance for comfort and warmth, typical connotations of fire. Use of language such as ‘dreadful’ and ‘terror’ increases this sense of a greater impending ghost story – that of which we hear about the Governess. Moreover this sets the mood and creates the atmosphere for the audience to fully appreciate the ‘horror’ of this ghost story. In addition, the idea of them telling ghost stories gives us an immediate impression that there is a ghost story awaiting the audience. The use of more dramatic language such as ‘for sheer terror?’ and ‘for dreadful – dreadfulness’ start the steep incline of suspense and tension we will feel throughout the story. The idea of authenticity throughout this novella is key for the audience to focus on. To increase this idea of the story being real, James uses a framed narrative to draw the reader in to believe that the tale is true. Overall the story could succeed without the prologue but with it, the audience is a lot more likely to proceed through the book with an idea or reality. The main character in the prologue, Douglas, tells the unnamed narrator and the rest of the group of a ghost story much worse than any that have been told. ‘If the child gives the effect of another turn of the screw, what do you say to two children ?’ Obviously hinting that his tale contains two children, increasing the horror the audience are now sure that they are reading a simple ghost story. However this idea can be argued as we continue throughout the prologue and the first chapter. We learn that about the Governess, moreover, we learn Douglas’ opinion of her. ‘Is in old faded ink and in the most beautiful hand’. From this we can interpret that Douglas’ may be fond or possibly in love with the Governess making his opinion biased thus taking away from the reliability of the story. The use of characters in the prologue almost acts as a metaphor for the reader. ‘Everybody will stay!’ and ‘I will – and I will!’ could be used to represent how James wants the reader to react to reading the actual ghost story. Straight away in the first chapter we learn about how the governess suffered ‘a succession of flights and drops’. Already we start to suspect the volatility of her and the reliability of her tale which obviously argues against the idea of it being a simple ghost story and starts to lay down the foundation for the idea that there may be undercurrents of something more suspect. However her description of Bly is incredibly positive. ‘A lovely day’, ‘summer sweetness’ and ‘a friendly surprise’ are all used in one sentence and all are incredibly optimistic, giving us the idea that the governess is a very positive person. However she does seem to be very hyperbolic, describing the first child, Flora, as ‘one of Raphael’s holy infants’. Obviously this is taking it to extremes, which hints that this might not be the only thing that she is exaggerating throughout the novella. Towards the end of chapter one, she describes parts of the house with language such as ‘empty chambers’, ‘dull corridors’ and ‘crooked staircase’ al of which are very negative descriptions, however she immediately starts to describe the house as ‘a castle of romance’ and something from a ‘story book’. Moreover, as she is peppering her negative quotes with positive and vice versa massively showing her incredible volatility. This is a major idea that the rest of the story may be exaggerated or maybe not even true. This could also foreshadow her personality later on into the novella. Throughout the chapters the language of Mrs Grose becomes increasingly questionable. As an audience we are constantly told that she is ‘simple-minded’ however she sees to know a lot more than she is letting on. ‘Are you afraid he’ll corrupt you?’ This is odd as she is talking about Miles, a ten year old boy. This make the audience think, how can a young child corrupt a fully grown woman? Leading us on to thin she may be talking about somebody else. As we progress through the story we learn about the Governess’s sexual frustration toward the master. Accompanying this idea is that she sees the apparition of Peter Quint upon the tower. This is could imply that she is projecting her sexual frustration onto an imaginary figure as a release to wanting to see the master. ‘A charming story suddenly to meet someone’ and later ‘He did stand there!’ She only sees this figure stood there when she is imagining the master, a suspicious idea that the reader may look into. ‘The man who met my eyes was not the person I precipitately supposed’. This quote backs up my previous point of the projecting this idea of meeting the master on her walks. During these first few chapters we experience a reasonable amount of religious language, ‘Raphael’s holy infants’, ‘divine’ and ‘he has red hair’ these all imply ideas of how the plot is affected by the religious aspects of the Victorian era and their views on ghosts. As they did believe in ghosts and were mainly very religious, these ideas were accepted avidly and only increased any emotions felt within the Victorian reader as they progressed through the story. Overall, my personal views are that there are underlying psychological ideas in ‘TTOTS’ and that although it can be read as a straight ghost story, to fully appreciate the novella the reader must delve deeper and retrieve any obvious ideas that suggest more than just a typical ghost story. James uses a variety of techniques which make his characters seem a lot more emotional deeper than just a person who is afraid in a big house. However the idea of authenticity throughout does back up the point of it being a straight ghost story. I do believe that it is a mazed reader and can be open to a variety of interpretations.

Mental illness Essay Example for Free

Mental illness Essay Charlotte Perkins Gilmans The Yellow Wallpaper, relays to the reader something more than a simple story of a woman at the mercy of the limited medical knowledge in the late 1800s. Gilman creates a character that expresses real emotions and a psyche that can be examined in the context of modern understanding. The Yellow Wallpaper, written in first person and first published in 1892 in the January edition of the New England Magazine, depicts the downward spiral of depression, loss of control and competence, and feelings of worthlessness that lead to greater depression and the possibility of schizophrenia. The beginning emphasis will be on the interaction and roles of the husband and wife in The Yellow Wallpaper, which are based on the male dominated times of the late 1800s. The main character, a woman whose name is never revealed, tells us of the mental state of mind she is under and how her husband and his brother, both physicians, dismiss it. You see, he does not believe I am sick! And what can one do? If a physician of high standing, and ones own husband, assures friends and relatives that there is really nothing the matter with one but temporary nervous depression a slight hysterical tendency what is one to do? The doctors seem completely unable to admit that there might be more to her condition than just stress and a slight nervous disorder even when a summer in the country and weeks of bed-rest have not helped. It might be thought that it is a simple matter of a loving husband being overprotective of his ill wife, but this assumption is quickly washed away by his arrogant atti tudes, combined with his callous treatment of her that only serve to compound the problem. At first he meant to repaper the room, but afterwards he said that I was letting it get the better of me, and that nothing was worse for a nervous patient than to give way to such fancies. John treats his wife in a manner that gives her reason to doubt herself and her capabilities. Her husband John has explicitly forbidden her to do certain things, although we are never told why; but it can be assumed that it is because of her frailty that some of these activities have been taken away from her. As such being prohibited to work and not being able to contribute to the household as a proper wife and new  mother she begins to feel helpless. So I am absolutely forbidden to work until I am well again. Personally, I disagree with their ideas. Additionally, she has been told not to write: There comes John, and I must put this away he hates to have me write a word. With no creative outlet her mind starts to find things upon which to dwell, things that only she can see. Virtually imprisoned in her bedroom, supposedly to allow her to rest and recover, she slowly starts to go insane. Without compassion or an outlet for her creativity, her mind turns inward and focuses on her now increasingly shrinking universe. She has no say in the location or the decor of her room. I dont like our room a bit. . . But John would [http://www.youtube.com/watch?v=5u7t0TuAnKU] not hear of it. She is not allowed visitors, It is so discouraging not to have any advice and companionship . . . but he says he would as soon put fireworks in my pillow-case as to let me have those stimulating people about now. In large part because of this oppression, she continues to decline. I dont feel as if it was worthwhile to turn my hand over for anything and Im getting dreadfully fretful and querulous. However by keeping her a prisoner in a room with offensive wallpaper and very little to occupy her mind, John almost forces her to dwell on her psyche. Prison is supposed to be depressing, and she is pretty close to being a prisoner. The story does hint to the fact that John knows he could have done more but simply does not seem to want to be bothered with the effort of such an endeavour for his wife. He never acknowledges that she has a real problem until the end of the story, at which time he fainted. John could have obtained council from someone less personally involved in her case, but the only help he sought was for the condition of the house and the baby. He obtained a nanny to watch over the children while he was away at work each day: It is fortunate Mary is so good with the baby. He also had his sister Jennie take care of the house. She is a perfect and enthusiastic housekeeper. There is one instance, however, when he does talk of taking her to an expert for assistance, John says if I dont pick up faster he shall send me to Weir Mitchell in the fall. Nevertheless she took that as a  threat since Dr. Mitchell was even more domineering than her husband and his brother. Perhaps, if she had been allowed to come and go and do as she pleased her depression might have lifted, I think sometimes that if I were only well enough to write a little it would relieve the press of ideas and rest me. It seems to her that just being able to tell someone how she really feels would have eased her depression, but her husband would not hear of it because of the embarrassing consequences it could bring to the family name. Thus, John has made her a prisoner in their marriage where her opinions are pushed aside, and her self-worthiness questioned. She does have a rebellious spirit in her and the fact that this spirit is being crushed is the final nail towards her insanity. Her desperation is almost like someone being buried alive and screaming knowing that there are people just above but who seem not to hear or care. Her reaction is to seek to prove her husband wrong, John is a physician, and perhaps . . . perhaps that is one reason I do not get well faster . . . While putting on an appearance of submission, in actuality she was frequently rebelling against her husbands orders. She writes when there is nobody around to see her, and she tries to move her bed, but always keeps an eye open for someone coming. As her breakdown approaches she actually locks her husband out of her room, I have locked the door and thrown the key down into the front path. I dont want to go out, and I dont want to have anybody come in, till John comes. I want to astonish him. This forces him to see that he has been wrong, and, since she knew he could not tolerate hysteria, to eventually drive him away. While there is supporting evidence that her husbands treatment of her was a major contributing factor to her madness, the possibility also exists that her madness was caused by an internal illness which, given the level of medical knowledge, her husband was unable to deal with appropriately. As mentioned in the beginning of this essay, Gilman creates a character that has real emotions and a real psyche that impresses upon the reader that she is slowly deteriorating into a mental illness known as schizophrenia (a disintegration of the personality). This illness, however it manifests itself within the personality of someone is usually highlighted through a variety of symptoms. The leading character exhibits these symptoms sporadically throughout the story. To begin with, one of the more obvious of her symptoms is her irrational obsession, displayed by relentless thoughts of and about, the yellow wallpaper that wraps the walls in her room. It is a room that she feels captured by and her obsessions start from the beginning of the story. I never saw a worse paper in my life, she says. It is dull enough to confuse the eye in following, pronounced enough to constantly irritate and provoke study Taken in isolation, this kind of observation might appear to be harmless to the uninformed observer, but as her obsession with the wallpaper grows, so does her dementia. At one point she describes lying on her bed and follow[ing] that pattern about by the hour . . . I determine for the thousandth time that I will follow that pointless pattern to some sort of conclusion. Interconnected with the first symptom of irrational obsession is that of thought processing disorder. This disorder can range in severity from a vague muddiness of thinking to a complete breakdown of ones mental processes. The first real clues that she is having trouble controlling her mental state of being comes into focus when she states, I get unreasonably angry with John sometimes . . . I take pains to control myself before him, at least, and that makes me very tired She tries to discuss her feelings rationally, but this only brings a stern reproachful look at which she gives up and returns to her room. Again her condition is revealed a few pages later when remarking that, It is getting to be a great effort for me to think straight. Soon, other noticeable changes in her mental state start to take shape. She slowly begins to show symptoms of paranoia, yet another unfortunate schizophrenic trait. She speaks of how happy she is that her baby is not exposed to the same torturous existence that she has to endure in her room with the yellow wallpaper. Of course I never mention it to them any more I am too wise, but I keep watch of it all the same Even the mistrust of her caretakers is further evidenced when she says, The fact is I am getting a little afraid of John. He seems very queer sometimes, and even Jennie has an inexplicable look When catching Jennie looking at the yellow wallpaper, she thinks to herself, But I know she was studying that pattern, and I am determined that nobody shall find it out but myself? This type of  paranoia is a firm indication that her psychological state is continuing to deteriorate towards complete schizophrenia. Another in the list of common symptoms of schizophrenia that the protagonist exhibits is hallucination. Of these hallucinations, one is when she sees people walking in the paths that she views from her bedroom window. As her condition worsens, she begins to have other hallucinations, this time focused on the yellow wallpaper itself. This is noticed when she exclaims, At night in any kind of light, in twilight, candlelight, lamplight, and worst of all by moonlight, it [the wallpaper] becomes bars! The outside pattern, I mean, and the woman behind it is as plain as can be. In addition to her mental hallucinations, she starts to also have ones where she can smell things as well, the only thing I can think of that it is like is the colour of the paper! A yellow smell. The climactic stage of her hallucinations comes when she realizes, that woman gets out in the daytime! It is at this point that her deranged thought processes become a coping mechanism to help her deal with her mental state of being. She passes into a full schizophrenic state and transforms from a helpless, self-pitying woman, to one who feels, in her mind at least, that she has broken free of her shackles. She feels that she has gained a sense of control, no matter how false that sense may be, as she says, I dont want to go out, and I dont want to have anybody come in, till John comes. I want to astonish him. Much has changed by the end of the story, so much in fact that in the end it is she who is metaphorically and literally creeping over John, who has fainted after seeing her in a deranged state of being. This is in contrast to their interactions up to this point when it was John who usually dictated and condescended her. The fact that the protagonist in this story is schizophrenic is supported by various bits of evidence. However, the question that remains to be answered is why a diagnosis of schizophrenia is important to interpreting The Yellow Wall-Paper. Schizophrenia is a logical choice in that it explains why the protagonist behaved in the way that she did. For her to overcome her submission to an environment that has sought to oppress her, she had to discard the personality within her that was meek and mild. This is a common defence mechanism of the mind in order to deal with situations it perceives to be uncontrollable. It is quite  possible within the realm of psychological study that the combination of the stress of childbirth, post-natal depression and the mental strain of having to repress her emotions triggered the schizophrenia. This terrible condition may have resulted from the bonds she felt would not allow her to express herself as a human being, mother and wife, a freedom that she so desperately needed. Her slide into madness, as a way to deal with her entrapment, is similar to a caged animal that, when backed into a corner, will fight for its life.

Difference Between Cost Control and Cost Reduction

Difference Between Cost Control and Cost Reduction Introduction A cost reduction program is a type of method which is to improve profitability of the organization or by expected to get a good result that flow to the bottom line of the financial statement and exempted from any serious damage to the organization itself. As this program is much more about reducing cost or reducing expenses of the organization, so a good cost reduction program is all about how to control the damage of an organization. Furthermore, a cost reduction program is said can be improved the profitability of an organization because by reducing expenses, profits are increased without making others changes. On the other hand, if the cost reduction program can matched with a sales improvement program and perhaps, finally it will get the double profit. A cost reduction program must be a complete plan that is results-oriented. A structured cost reduction program will put the company on track to achieve maximum profitability and achieve the highest performance. Moreover, this program also implies a series of program that retain all of the essential characteristics and quality of the product and thus it must be confined to permanent and genuine savings in the costs of manufacture, administration, distribution and selling, brought about by elimination of wasteful and inessential elements form the design of the product and from the techniques and practices carried out in connection therewith. What is the different between cost control and cost reduction? In fact, cost control also known as cost management or cost containment; it controls the costs of the organization at the given level. Besides, cost control emphasis on ensuring that the cost does not exceed the standard budget of the organization. Businesses use cost control methods to monitor, evaluate, and ultimately enhance the efficiency of specific areas, such as departments, divisions, or product lines, within their operations. However, cost reduction is a power exercise or is an exercise which will out all of the effort to saving cost from whatever level they are. Cost reduction does not have any standard, or anything is accepted as ideal. Every element of cost is scrutinized, every operation is screened and every procedure is analyzed to identify the ways and means of reducing costs. Cost reduction can result in saving the product cost, manufacturing cost s, and life cycle cost. There are two different concepts between cost control and cost reduction. Cost control is achieving the cost target as its objective while cost reduction is directed to explore the possibilities of improving the targets or company profitability. Therefore, cost control will end the exercise when achieved the organization target or objective. While cost reduction is a continuous process and it has no visible end. Furthermore, cost control try to attain the lowest possible cost under existing conditions whereas cost reduction does not recognize any condition as permanent since a change will result in lowering the cost. If the cost control emphasis is on past and present, while the cost reduction emphasis is on the present and future. Besides, cost control is a preventive function whereas cost reduction is a correlative function. It run even when an efficient cost control system exists. The difference between both of it can be summarized as cost control ensuring the costs is in accordance with established standards whereas cost reduction is concerned with try to improve the cost by continuous and without accordance with any of the standard. The main benefits of cost reduction programs are it can enhance profitability and enhance cash flow of the organization. It presents the key elements and factors to consider in program design and implementation. Cost reduction program is also can ensure the results will match with the goals or objective and the values of the organization. It is a widely-acknowledged fact that cost reduction program is one of the most challenging responsibilities or tasks that a company needs to undertake, especially when there are so many ways open to cost-conscious managers. Finally, an integrated tax reduction program can reduce the onerous financial burdens that can stable a companys development and can free up precious capital that can be result to the firms long-term benefit. Literature Reviews/Case Study/Research Findings There are five cases and cost reduction methods in these literature reviews. The methods including Target Costing (TC), Activity-Based Costing (ABC), Just in Time (JIT), Enterprise Resource Planning (ERP), and Value Engineering (VE). Case study 1 (Target Costing) Definition: Target costing also called product costing method in which an attempt at the planning and development phase of a product life cycle to attain a specified cost that is decided by management. This approach is to seek the lower costs by designing a quality product that reduces costs in the production phase. It can be described as a systematic process of cost management and profit planning. Case study: In 1993, Toyota uses target costing approach to generally reduce costs at the design stage. By using this approach, Toyota sets goals for cost reduction and then tries to achieve these new targets through design changes that will accomplish the cost reduction goal. Toyota was comparing the costs of the new design with the old design in order to guarantee a cost reduction after implementation of the new technique. This is the main idea that Toyota uses to achieve their companywide goals. There are several steps in the sequence of price, production, and cost decisions. First, Toyota decides what the new retail price of the automobile by taking the old price and adding the value of any new functions. The sales division comes up with the suggestion for the production volume by taking past numbers and indexing them to market trends and the state of competitors. Second, Toyota is focus on cost planning. This cost planning is based on the product plan and targets for retail price and also production volume. The purpose of using cost planning by Toyota is for determine the amount by which costs can be reduced through better design of the new model. Toyota establishes a profit target that is subtracted to determine their target cost. These cost planning decisions are made for three years before they release the model. Toyota estimates the approximate costs of a new model by sums of the cost variations of the new model and the old model. This technique is very beneficial to Toyota, because it tends to be less work and provides more accurate results. In addition, it also helps the specific divisions understand the cost fluctuations. Besides that, Toyota removes variable costs both models incur such as wages and indirect costs by using this approach. Meanwhile, they use their decisions on costs that change between the two models in design and production volume. The main point in this case study is to show how cost planning at Toyota is focused on the design phase. Toyota does this by setting goals for cost reductions through design changes. Toyota takes these goals and then assesses them to different divisions to make the necessary changes. Toyota believes that by changing product design to produce lower price to achieve a higher level of profitability. Case Study 2 (Activity-based Costing) Definition: Activity-Based Costing is a costing model that identifies the cost pools, or activity centers, in an organization and assigns costs to products and services (cost drivers) based on the number of events or transactions involved in the process of providing a product or service. The concept of Activity-Based Costing has been considered a sophisticated method of cost calculation since the early 1980s. In addition, Activity-Based Costing (ABC) assigns manufacturing overhead costs to products in a more logical manner than the traditional approach of simply allocating costs on the basis of machine hours. Activity-Based Costing first assigns costs to the activities that are the real cause of the overhead. It then assigns the cost of those activities only to the products that are actually demanding the activities. Case study: Boeing Commercial Airplane Group (BCAG) is the worlds largest manufacturer of commercial airplanes. It comprises approximately 60% of Boeings total revenues. BCAG Wichita is a cost center manufacturing plant producing fuselages, noses, struts, nacelles, and thrust reversers for 737, 747, 757, 767, and 777 airplane models. In May 1999, the plant employed approximately 16,835 employees directly, and was responsible for indirect employment of 53,100 workers within the state of Kansas. As part of its overall drive to gain and retain world-class aerospace manufacturing status, BCAG Wichita is focused on developing a lean, efficient design and production system supported by an effective cost management strategy. The cost management strategy supports initiatives designed to link the manufacturing process and support activities so as to simplify the whole production process, while maximizing benefits from the use of lean business practices. Cost management strategy initiatives include simplifying production, shortening flow and cycle times, increasing quality and inventory turnover, identifying core products and processes, and linking the design and manufacturing process to decrease product time-to-market. Activity-Based Costing links and supports the manufacturing process. It provides information to tailor business streams and material management, costs of activity and processes, value added versus non-value added analysis and profitability analysis used to improve the make versus buy decision-making process. ABC also provides analysis of set-up and run costs, costs of scheduled and unscheduled maintenance, costs of asset failure, and costs of manufacturing capacity, thereby allowing manufact uring managers to manage the assets under their control more effectively. Finally, ABC provides analysis on the costs of design changes in configuration as impacted on the manufacturing floor, costs of incorporating complexity into a configuration design, and the costs of quality. The highest hurdle in achieving this type of cost management architecture lies in moving the corporate financial department from its classic accounting role as scorekeeper or policeman to the role of business partner. In a business partner role, the corporate financial department can support strategic decisions relevant to the companys continued competitive advantage by providing financial data that highlights the impact of these decisions. BCAG Wichita views a successful implementation of ABC as one that fulfills three major roles: Addresses the size, complexity, and diversity of the manufacturing process, Facilitates the integration of financial decision makers into a more supportive business partnership role, and Implements effective cost management strategy initiatives. Case Study 3 (Just in Time) Definition: Just-in-time (JIT) production also known as lean production, it is a pull system of production, means the actual orders provide a signal for when a product should be manufactured. When there is Demand-pull, it enables a company to produce only what is required, with the correct quantity and correct time. These features of Just-in-time production system accomplish close organization among work- stations. Therefore, its objective can be defined as producing the right part in the right place at the right time (in other words, just in time). Case study: From July 1990, top managers of Daioku have begun completing the Kanban production system-moving from the traditional push-type production management to pull-type production management. This type of system produces only quantities necessary to fulfill the demands of the next operation. The quantity is pulled when it is needed, where it is needed, and in the exact quantity which is needed. For instead, since beginning the implementation of Just-In-Time, many difficulties have occurred. The difficulties include: Combining the data and material flows instead of classifying them. Post the products, its store and manufacturing process instead of a flow without any post. Changing from L-shape assembly line into V-shape assembly line. This requires a set of new equipments and techniques. Problems exist between Daioku and supplier (subcontractors), for instance, traditional ways of shipping material based on the pre-determined plan is now being eliminated and every supplier are now required to collect the Kanban back from the order-post and ship their material based on the information in the Kanban. Everyone in the firm required to participate in Just-In-Time. They need to determine how to make the shop floor operations become easier and efficient. Daioku carried out discussions and meetings to find solutions to the problems in the year of 1992. Therefore, Daioku sent their experts to help suppliers to solve their problems gradually. In Daioku, The inventory part was reduced the dramatically in this year. By using Just-In-Time method, the stock levels of raw materials, work in progress, components and finished goods can keep in a minimum. However, this requires a carefully planned scheduling and flow of resources through the production process. Just-in-time method promotes continuous enhances on the products. At the same time, this method can eliminate waste. Waste results from any activity that adds cost without adding value. For example, the unnecessary moving of materials, the accumulation of excess inventory, or the use of faulty production methods that create products requiring subsequent rework. Just-In-Time should enhance the profits and return on investment by reducing inventory levels (rising the inventory turnover rate), reducing variability, improving product quality, reducing production and delivery lead times, and reducing other costs (like those associated with machine setup and equipment breakdown). In conclusion, Just-In-Time production system aims to (1) meet customer demand in a timely manner (2) at the lowest possible total cost and (3) with high-quality products. Case Study 4 (Enterprise Resource Planning) Definition: Enterprise Resource Planning (ERP) is a computerized inventory control and production system that was born from Material Requirements Planning systems (MRP). It is a system that organizes functions of an institution. It assists in account, finance, human resources and e-commerce applications through creation of databases and graphical user interfaces. It unifies the tasks of institutions like corporations, government agencies, non-profit organizations, powerful institutions and industries and businesses establishments. There are some businesses start to compete on a global scale, it is critical to streamline operations and processes in business to reach a higher level of productivity and efficiency in information exchange and supports e-commerce applications, for example supply chain management (SCM) and customer relationship management (CRM). On the other hand, software that comes up with functionality to various systems that will coincide with one another as a whole is required to combine all of the information or operations of a company into a single unit. Central database is one of the most outstanding parts of the ERP system. Case Study: By October 1997, a group of 50 top business executives and 10 senior IT professionals had been congregated to device the SAP project to come up with a set of best practices that would become common work procedures for every Nestlà © division which are manufacturing, purchasing, accounting and sales by adopted new pan-Nestle way. Firstly, in order to implement the technical side, a common structure across the company, the vanilla would be code 1234 in every division. The SAP system customize around the uniform affair procedure. The group decided that they are not to use SAP in supply chain because the ERP supply chain module adopted was brand-new and therefore risky. Furthermore, Manugistics supply chain module followed all the SAP standards and could easily be integrated. Nestlà © implement five SAP modules which are purchasing, financials, sales and distribution, accounts payable and accounts receivable and the Manugistics supply chain module which deployed across every Nestlà © division, by March 1998. Besides that, the purchasing company for confections pursues the identical best practices and information as the purchasing company for beverages. To beat the Y2K deadline, the best project group had overlooked the integration points between the modules. All purchasing departments now used general names and systems, and followed a general process, but their system was not integrated with the financial, planning or sales groups. A salesperson may have given a valuable customer a discount rate and entered it into the new system, however the accounts receivable department wouldnt know about it. Hence, it would appear to the accounts receivable operative as though the invoice were only partially paid as customer paid the discounted rate. The project team had essentially replaced divisional silos with process silos to unify the companys separate brands. The time constraints necessitated by Y2K had put too much pressure on the people in charge of executing the changes. The project team had lost the big picture of how the various components would work together. Hence, the existing modules had to be integrated and the team still needed to roll out another two more SAP modules which are sales and distribution on the domestic side, and accounts receivable as well as a new module for the supply chain. Since Dunn had rejected the SAP supply chain module two years before, therefore, it leads to decision to replace all but a couple of parts of the Manugistics system with APO. The last state of design was completed on April 2001 and giving the project teams a highly detailed road map to follow. One month later, Tom James came on board as director of process change for the Best project with the responsibility as a connection between the divisions and the project team. He was so surprised by the poor relationship between divisions and project team. They conducted surveys that were involved of how the workers affected by the new systems were dealing with the changes and the feedback was the users were not prepared to make process alter. ERP projects are famous and need a long period and a lot of money to done it. Dunn maintains the slow and steady wins the race. Nestlà © United State accomplishes the significant ROI with the greatest bulk of savings from better demand forecasting. The old process included a sales man giving a number to the those men and demand planner do not know what the hell they are talking about then the factory changes the number again. With SAP in place, general databases and business processes lead to more trustworthy demand forecasts for the various Nestlà © products. Furthermore, because all of Nestlà © United State also using the same data then Nestlà © can forecast down to the distribution center level to diminish the inventory and the redistribution expenses that occur when too much of a product is sent to one place and not enough to another. The supply chain improvements accounted for a major chunk of the $325 million has saved from SAP. Case 5 Value Engineering (VE) Definition: Value engineering (VE) is a systematic method to improve the value of goods or products and services by using an examination of function. Value, as defined, is the ratio of function to cost. Value can therefore be increased by either improving the function or reducing the cost. It is a primary tenet of value engineering that basic functions be preserved and not be reduced as a consequence of pursuing value improvements. [1] Value engineering is sometimes taught within the project management or industrial engineering body of knowledge as a technique in which the value of a systems outputs is optimized by crafting a mix of performance (function) and costs. In most cases this practice identifies and removes unnecessary expenditures, thereby increasing the value for the manufacturer and/or their customers. Case Study: This project was for an underground car park beneath a new shopping centre in Three Waters, Madrid. A fully ducted ventilation system was the approved design contained with the Spanish Building Regulations. However, this would be costly to install and would impact on the development programmed. Therefore, the purpose of the simulation was to demonstrate that a non-ducted, mechanical system would also meet the Spanish Building Regulations. The planning requirements often mean extensive car parks to proposed offices, residential and retail developments. The ventilation of these car parks can present a significant cost to the developer in terms of capital expenditure for plant, energy consumption and maintenance, as well as the implications for the programmed if extensive ductwork and plant has to be installed. The use of Computational Fluid Dynamics (CFD) is most effectively used at early design stage, also can be used as a tool for solving existing problems. The specific objectives of a project can vary considerably. The key objectives of the simulations are normally to ensure that the distribution and concentration of carbon monoxide (CO), is in accordance with Building Regulations. The Building Regulations comprise a number of Approved Documents. These Approved Documents contain design options which if adopted, the scheme is deemed to comply. Applying Value Engineering can identify potential savings in capital, maintenance and energy costs without any adverse effect on performance. Computer simulation is therefore, becoming an essential value engineering design tool. For example, a designer may question why 6 air changes per hour (ACH) should be provided when 4 ACH will accomplish the desired result. The benefits of simulation are that the proposed designs can be tested against the acceptance criteria contained within the Building Regulations before any financial commitment is made. In conclusion, Three Waters using  [i]  of Computational Fluid Dynamics (CFD) as a tool for value engineering can significantly benefit new and existing developments by avoiding unnecessary capital expenditure, reducing construction time, and providing reductions in energy consumption, CO2 emissions and maintenance. Analyses/Discussion Cost reduction programs have classified in many types and each type of the program will provides different benefits to the companies. In this part, we are going to give the analysis of the advantages and benefits the types of cost reduction methods which shown below. Finally, analysis of cost reduction will show in the end of this part. Total Quality Management (TQM) TQM is the one of the famous method that uses the focus of quality of management process. This will increase the productivity and efficiency in the business and in the manufacturing process. If the process is used from the beginning during the manufacturing process, there is less likely of chance for incorrectly producing products or devices. Therefore, it would bring the correct product in the end of process in creating less waste in raw materials and less lost hours due to repeating of the process. TQM method is not only will increase the productivity, but it also increases the level of pride in the employees. This is because each employee becomes responsible for a higher level of quality in his or her work. Kaizen Costing (KC) Kaizen costing is the maintenance of present levels for products currently being manufactured via systematic efforts to achieve the desired cost level. In general, it is the process of cost reduction during the manufacturing phase of a product. The word KAI is means modify and change and ZEN means think, make good, and make better. So, in overall, kaizen costing is focuses on continuous and gradual by small betterment activities rather than large or radical improvement made through innovation or large investments in technology. Basically, kaizen costing imply four effects, there are paying attention to the quality and productivity, acquiring little by little kaizen and problem-solving ability, perceiving the work place as their own, and understanding the meaning of kaizen. Kaizen costing meets the goal with the continual and relentless reduction of non-value-added activities and costs, the elimination of waste, and improvements in manufacturing cycle time all contribute to the effort. In additional, kaizen costing has brings the benefit of reduction in production time, reduction in rejection, energy saving, and improved quality. Value Engineering (VE)/Value Analysis(VA) Value engineering (VE) or value analysis (VA) is a process of systematic review that is applied to existing product designs in order to compare the function of the product required by a customer to meet their requirements at the lowest cost consistent with the specified performance and reliability needed. The key focus of the value engineering is the management of functionality to yield value to the customer. For instance, not that long ago, consumers of electric kettles were offered a variety different types of metal-based boiling device. The value of a kettle is derived through heating water and therefore its functionality can be determined as temperature, capacity, reliability, safety, and else. With the same functionality of the boiling water, designers would probably look towards a kettle which made of plastic. Plastic has the same functionality as metal in terms of containing and boiling water. However the switch from metal to plastic does not impair this value and functionality with the customers. This is because the customers just want to boil water, but it gives result in a cost saving for the manufacturing company. The benefits of effective VE process can be summed up including speed of getting an effective design into the market without problems and through error-free manufacturing and assembly processes, reliability and durability of the product in the market which enhances the reputation of the product and the company, low overall cost which enhances product margin and also releases finances within the business as well as allowing the ability to engage in price competition, enhanced quality and compliance with minimal costs of warranty that allows a company to differentiate its products based this perceived quality of use and esteem, and finally the value engineering process satisfies the primary goal of any business which is to make a profit and survive. Activity Based Costing (ABC) Activity-Based Costing method is a tool which could bring about significant improvement in the quality of overhead cost allocation. The ABC process is able to incorporate both physical measures and causal principles in the costing system. The basic idea of ABC is to allocate costs to operations through the various activities in place that can be measured by cost drivers. In other words, cost units are assigned to individual activities, such as planning, packing, and quality control using a resource cost driver at an initial stage with the costs of these activities being allocated to specific products or cost objects in a second phase of allocation via an activity cost driver. The advantages are providing insight into the fastest- growing and least visible element of cost-overhead, improving profitability by monitoring total life-cycle cost and performance. It also improves the effectiveness of budgeting by identifying the cost or performance relationship of difference service level. It encourages continuous improvement and total quality control because planning and control are directed at process level. At last, is facilitating elimination of waste by providing visibility of non-value added activities and improving make or buy, estimating, and pricing decisions that are based on product cost that mirrors the manufacturing process. As a result, ABC can support managers to see how to maximize shareholder value and improve corporate performance. Enterprise Resource Planning ERP can be describes to integrate all departments and functions across a company onto a single computer system that can serve all those different departments particular needs. Hence, it is extremely important to know how to use effectively Enterprise Resource Planning for a success implementation. In order for Enterprise Resource Planning system to succeed, it must be capable of successfully integrating manufacturing with the other processes of a company. Besides that, Enterprise Resource Planning is not the cure to all the problems a business will face. A number of advantages and disadvantages exists to this technology, and those who know this will be the most likely to succeed. By the implementation of Enterprise Resource Planning, it comes up with a number of advantages that helps to solve a number of problems that have plagued large organizations in the past and used to integrate the many processes of a company or organization. Scalability is also an advantage, like Enterprise Resource Planning also helps to improve the production levels and to control costs more efficiently, and this enabled us to control the whole enterprise more efficiently. As a result, Enterprise Resource Planning is no longer just a competitive advantage in this globalized world. It is very important requirement for every enterprise. To truly be effective, it may be necessary to combine the benefits of Enterprise Resource Planning with those of Customer Relationship Management (CRM). Just in Time (JIT) Just in Time is a set of techniques to improve the return of investment of a business by reducing in-process inventory and its associated costs. In addition, the process is driven by a series of signals, or Kanban that tell production processes to make the next part. Just In time causes dramatic improvements in a manufacturing organization`s return on investment, quality, and efficiency. For an example, Toyota Motor Thailand had implement Just In time methods during the crisis on July 1, 1997. Toyota Motor showed a strong commitment to uniting with whole workforce as well as suppliers and dealers to ride out the crisis. This commitment was shared with the labor union, and the entire company together with the Toyota Group implemented through measures to make operations more leaner, utilizing the resulting excess labor to implement improvement initiatives as well as additional education of employees and suppliers. Based on the concept of just in time, energy was supplied to each process when it was needed and in just the right amount; personal wastebaskets were reduced to one quarter of their original size to encourage less paper usage; and localization was promoted by expanding local procurement to Tier 2 and Tier suppliers. Meanwhile, Toyota Motor Thailand also directed energy into the education and training employees. As a result of these efforts, without having dis missed a single full-time employee, inventories were cleared in January 1998 and production began to rise again. In 2004, Toyota Motor Thailand produced 273980 vehicles. Toyota Motor Thailand paved the way for the strides forward it is making today. There are several examples of advantages of JIT. Both inventory and the cost of holding it go down as the inventory-reorder quantity and the maximum inventory level drop. However, because inventory requires incurring an ordering or setup orders that mu

A Study on Effects of Different Levels of Aloe Vera Gel as an Alternati

According to the results obtained on feed intake in different periods, it can be seen that the Aloe vera groups have the highest level of feed intake compared to the control group and this leads to increased body weight gain in these groups in comparison to the control group. Olupona et al. (2010) reported increased feed intake in groups which were treated by Aloe vera gel solved in water (15, 20, 25, and 30 cm3/dm3) as body weight gain rose. Similarly, the present study shows increased feed intake in the 2-percent Aloe vera gel with raised level of body weight gain. Increased feed intake in Aloe vera groups can be attributed to changes in feed taste and stimulated appetite since, as reported by Windisch et al. (2008), phylogenic substances (as additives to birds’ feed) can improve taste of diet. Furthermore, Wenk (2002) argued that herbs can stimulate appetite and endogenous secretions which, in turn, improve grower performance. on the other hand, our experiments showed that Aloe vera groups consumed more feed compared to the antibiotic groups both in the grower period (days 25 to 42) and during the total experiment period (days 0 to 42). Guo et al. (2004) observed that food consumption level in chickens treated by Chinese herbs added to their diet was higher than this level in chickens fed by viriginiamycin mixed with their food. In general, increased body weight in different periods show larger body weight gains in the antibiotic groups compared to other groups. Among the experimental groups, the 2-percent Aloe vera group had better body weight gain compared to other Aloe vera groups and the control group, showing no significant difference from the antibiotic group. On the other hand, findings obtained in studies on treatment... ...nd viral infections (Sohn et al., 2000). Other researchers reported properties in herbal medicine which are similar to those of prebiotics (Verstegen and Schaafsma, 1999; Cummings and Macfarlane, 2002; Guo et al., 2004). By definition, prebiotics are dietary supplements in the form of nondigestible carbohydrate that favor the grower of desirable microflora in the large bowel (Gibson and Roberfroid, 1995). Since the main polysaccharide contained in Aloe vera gel is acemannan, the enhanced body weight gain in groups treated by Aloe vera compared to the control group may be attributed to antibacterial properties of Aloe vera gel which can improve intestinal microflora. Furthermore, the acemannan contained in Aloe vera gel can stimulate immunosystem and improves body resistance against bacteria and viruses; and this, in turn, improves grower and body weight gain.

religion :: essays research papers

I do not feel that I should participate in the â€Å"Pay it Forward† assignment. This assignment is telling us to go be nice to people and we will get a good grade. If we don’t do anything nice, we will not receive a good grade. I do not feel like anybody should be forced to do something nice, if they have to be forced, they shouldn’t do it at all. If it is not done for the correct reasons, it doesn’t mean anything. I do nice things for people. If I am in the mood and feel that I should help somebody out, I will, but I will not give them a paper and turn it in to the teacher for a grade. How impersonal is that? If I receive a paper from somebody during this project, I will not feel grateful that they performed an act of kindness for me because it is not for the right reasons. Their act of kindness is for a grade in religion class. Besides the â€Å"Pay it Forward† project has almost nothing in common with the movie. In the movie the little boy, Trevor, decided that he should change the world. His idea about how to do it is a good theory, but it will never work as well as anyone would hope it would. In the movie he saves a homeless man, and he took him home and gave him some money, food, and a place to sleep. He did not have to do anything at all. If I remember correctly, that assignment in the movie was for extra credit. Today we received an assignment that is worth a very healthy sum of points for the second nine weeks. Why should we have to be given grades to be nice to each other? Has the world gone that bad? Having to basically bribe or force people to be courteous to others. That, in my opinion is wrong. This project has a good purpose but I don’t feel that it is the right thing to do. People should be nice to each other all the time, not just when we get points for it. I feel obligated to go and do good and be the nicest person I can be, but I would rather be nice to someone and feel the gratification that would follow that act. I do

Affirmative Action and Discrimination :: Free Essays Online

Affirmative Action and Discrimination 1. Race relations in general and affirmative action in particular have arguably been the most divisive and hotly contested issues in contemporary American politics. Many people feel that affirmative action is necessary to either counteract injustices or ensure the advancement of certain minorities. Affirmative action proponents generally point to four justifications. These are racism, poverty, diversity, and the problem of underrepresentation. Proponents point out that many blacks, Hispanics and Native Americans live in substandard housing, go to substandard schools, and live in neighborhoods where crime is rampant. They claim that they are victims of daily racism and that this hurts their chances for advancement. Proponents point to small numbers of these minorities in certain desirable jobs (i.e. CEOs of corporations and high elected office) as evidence of underrepresentation of minorities and a need for diversity both in the workplace and in higher education. 2. There are several different levels of affirmative action. They include: quotas, preferences, and outreach, in lessening order of severity. Quotas, also called â€Å"set asides†, deal with having a certain amount of jobs or college spots reserved for a particular group. For example, if a University admits 1000 students every year and sets aside 150 seats that are open to blacks only, this is an example of a quota. In the Supreme Court case Bakke v Regents of the University of California , the court ruled that these quotas could not be used by the system but that race could be considered a plus in admissions to the medical school. This brings us to preferences. Preferences are when persons from certain groups (usually groups that have been underrepresented or disadvantaged) are given a ‘boost' in admissions. An example of this would be the practice at the University of Michigan, which was recently overruled by a U.S. District Court. At the University of Michigan, appli cants are graded on a 150-point scale. Blacks, Hispanics and American Indians get 20 points for their race, equal to raising their grade-point average a full point on a 4 -point scale (Focus on Affirmative†¦). This case has recently been appealed to the Supreme Court, casing new light on this decades old question. The third and least severe form of affirmative action occurs when no preferences are given, but when special efforts are made to recruit members of certain groups. This is called outreach. An example of this would be when a Hispanic student receives a letter from the minority recruitment office at a prestigious university urging him to apply (Ezorsky, 34).

Speech: Adolescence and Higher Risk

The amount of teenages getting pregnant around the age of 15-17 is quite concerning . Although most Teenage Pregnancies are unintentional . It still means there are chances of them becoming pregnant. At the same time,Teenage Pregnancies associate with social issues. Finally they come to a time when they need help and support. Well , My name is Taylah and by now you should know my speech will be about Teenage Pregnancy. Firstly most teenage pregnancies are unintentional.Women of all age may have unintended pregnancies , but some groups , such as teens are at a higher risk. A lot of teenagers who become pregnant sometimes wish they weren't . This happens because they either dont want to be parents or they know it's not the right time. By the time they find out they are pregnant they start stressing out because it was never meant to happen and also because they dont want thier parents to know or to find out. Teenage Pregnancies associate with social issues , such as lower educational le vels and higher rates of Poverty.This happens because when they are pregnant they drop out of shcool and just worry about their baby. Although they are unemployed they go on a benefit which is when money is given by the goverment. Why do the young mums still lead a poor life inspite of money given by the goverment ? Well , they lead poor life because they dont think about the future , instead they spend all their money on their child. They don't save up any money and they keep buying things for themselves and their child. Finally they come to a time when they need help and support with their child.They need support with their child so they live a happy life and they need support from their family so that they dint get stressed out and start abusing their baby,and they also need help with buying the right items such as nappies ,food,clothes e. t. c. In conclusion,Teenage Pregnancy need to decrease as it is making NZ look very bad because the rate of Teenage Pregnancy is the highest i n NZ as compared to other countries in the world. In the end I would like to say that teenagers should stay in school and study so that they have a brighter future and can give a very dignified life to their families.

Has Child Behavior Worsened Over the Years? Essay

Is your child forgetful, irresponsible, moody, and prone to daydream? (Figure 1.1) Does he experiencem to lack penury and become easily bored? (Empowering P arnts) Has the enigma become worse than it was a twelvemonth ago? A childs carriage is defined solely by environmental factors such as family, cultures, and fooling experiences. As a result, studies go through shown that receivable to these factors, childrens style has become worse. A childs behavior whitethorn be a problem if it doesnt match the expectations of the family or if it is disruptive. (Family Doctor.org) P atomic number 18nts are childrens greatest role models. Your children will see your example positive or interdict as a pattern for the modality life is to be lived. (Rcmp.Grc.go) The 1960 Census report that nine percent of children lived in virtuoso parent families, compared with the 28% reported by 2000. (Prb.org) In 2012, according to the Census office staff ab egress 80% of children were raised by virtuoso mothers. in that respectfore, many disadvantages come from a unmarried parent household. The American academy of Pediatrics proposes that boys in a single household become more assertive trying to full the fathers role in the household. If the mother is absent, the untried girls try to become the caretaker looking out for her family. (Everydaylife.GlobalPost) This leads children to raise themselves, forcing them to give up their childhood. This overly could lead them into trouble because the children wouldnt grapple right from wrong which is leading up to child behavioral problems.Single parents are withal often financially pureeed, make it hard n children. Children will be able to read through your stress and as they grow older, some would exigency to help. This will lead the children into desperation causing them to steal or maybe convey in dirty money, money they arrive earned illegally. Parents today are also seemly younger and younger. Kids raising kids is drastic. The cons of this are these young parents trying to be friends with their children quite of coaching them. Everything these young parents listen to or do, they will let their children do the same, idea this act is cute. Many people with beg that child behavior has improved because of education, the applied science is better. Education is great. Education is by utmost better today than a vitamin C years ago The fields of encyclopedism contrive been opened up to boys and girls every bit to seek out far great possibilities than were even imaginable a deoxycytidine monophosphate years ago.The Education now is a betterthan before. We are not get the better of and now we can use net income for Education. Alisham2002 (Debate.org) Though technology has improved, and todays education is better, this has nothing to do with the behavior of this generation. Technology is a downfall kids exact access to everything and are actually becoming too independent on electronics . nicety and everyday experiences such as medicine and video games have had a extensive impact of childrens behavior. Music videos and games have become extremely explicit. Ive cognize and seen children dance provocatively and cussing up a storm like the rappers does. Whereas, my mom would have never went for that In conclusion, child behavior has worsened over the years because of single parenting in households, teen parenting, and todays music and culture. In earlier years, at that place was a limit to all of these things. There could be a passcode on your TV so no child would consider these explicit things. Today, parenting is terrible and so is childrens behavior.Works CitiedDealing With An Angry, Acting-Out Child? Parenting Articles close Arguing & Fighting. N.p., n.d. Web. 16 June 2014. . What You Can Do to Change Your Childs Behavior. health Education. N.p., n.d. Web. 16 June 2014. . The Rise-and Fall?-of Single-Parent Families. The Rise-and Fall?-of Single-Parent Fami lies. N.p., n.d. Web. 16 June 2014. . Family Issues for Single Parents. Everyday Life. N.p., n.d. Web. 16 June 2014. .